Cable Analyzer Home   Cable Testers and Harness Testers Made Easy!
 

                Cable Testing Products        Support        Information Center        About Us        Contact Us

1-800-441-9910

  

Welcome to easy-wire™, Harness building made easy.
Our easy-wire System makes testing wire harnesses easy.  It also makes building harness boards easy. These pages introduce you to the easy-wire System.  For application assistance or for an easy-wire quote call us toll free:    800-441-9910.

If you're new to the easy-wire System read the information on this page. You may also find these additional pages useful:



Introduction

The easy-wire Harness Board Test System has three distinct elements;
  • Harness Board Components; (Hardware on the board)
  • easy-wire Software; (Windows based Software which controls all the test processes)
  • easy-wire Tester; (The tester hardware which does the measuring and point switching)
Harness Board Tester
The CR, System Components, and Software.

The easy-wire System Components make building a harness board easy, even when the board is wired for testing. With the components you can build:

  • Low Cost Boards
  • Easy to Maintain boards
  • Boards back-wired for testing on the board
  • Build the harness "on the board" or "above the board"
  • Grid Tiles that allow fast setup and re-use of components
See  Tour the easy-wire System Components for more information.		 Above Board Harness Test Example
Some of the "above board" components.
The easy-wire Software was designed to make harness assembly easy. Here are some of the features of this Windows®-based software:
  • A simple user interface makes the software easy to learn.
  • Tests wires, resistors, capacitors, and diodes.
  • Allows you to label points, connectors, and nets.
  • Gives you visual and audible feedback including LEDs for guided assembly, customizable sounds, and graphical connectors.
  • Security controls access to all areas of the software.
  • Multiple test stations can share a single network database.
  • SPC data collection (exports to our SPC Link software).
  • Choose from several test modes including: single test, continuous test, sequential build test, random build test, and single pass build test.
  • Create test programs by learning a known good device, by importing test data, or by hand entering test instructions.
  • Create and modify test programs off-line without a tester attached to the system.
easy-wire Harness Test System
The easy-wire Main Menu.

The first tester in the easy-wire System is the easy-wire CR. This tester can check opens, shorts, and mis-wires as well as test resistors, capacitors, and diodes. The CR was specifically designed to light LED's in your fixturing to assist you in building a harness. The CR is fast, easy to use, and low cost.

Note: If your testing specs' require hipot testing please call us on our toll free line: 800-441-9910.

easy-wire CR Cable and Harness Test System
The easy-wire CR shown with one
Base Unit and three Add-On boxes
(1024 points total).
Cirris Systems- Our Products- easy-wire System.
Toll-free 1-800-441-9910.
easy-wire CR and easy-wire System Components are Patent pending.

© Cirris Systems Corp.